Re: capacitive paddle issue

Willi, OE1WKL


This is also very likely a soldering problem. mCould be a short in the path of the external paddle (touch and external work in parallel) - check at the connector for the external paddle, and check all Heltec pins for shorts.



Am 11.06.2020 um 20:57 schrieb igorvasilyev007@...:

Hi there,
seems to be after solving of lots of mechanical bugs (soldering) still remain an issue with concerns of

capacitive paddles - its on CW keyer mode sending itself continuously "T" ( - ). Touching left one can activate continuously "A" ( .- ).
All other modes capacitive paddles doesn't works.

Join to automatically receive all group messages.