Topics

New build - no sound


Paul Needham
 

Hi Morserino-ers,
Just built my M-32 and all seemed to go well but I'm not getting sound. I am a relative novice in the soldering department so it could be a bad connection somewhere. I may send out a call to my local ham group to ask for help.

Mein Rig arbeitet nicht. Ich habe kein Klang haben. Hat jemand anderes dieses Problem gehabt?
73
Paul M7PBN


George Anderson
 

Hi there Paul..
I had same issues .. no sound and issue with paddles

My main issue was my soldering wasn't great and there were a couple of bridges.
After a,little reheating joints all was fine 

I also had a repeating DAH when trying to use cw generator .

Try reheating all the solder joins you made while checking cw encoder 
I think we had same issues 

The m32 is awesome 

George gm0syu 

On Wed, 16 Sep 2020, 18:14 , <paulneedhamishere@...> wrote:
Hi Morserino-ers,
Just built my M-32 and all seemed to go well but I'm not getting sound. I am a relative novice in the soldering department so it could be a bad connection somewhere. I may send out a call to my local ham group to ask for help.

Mein Rig arbeitet nicht. Ich habe kein Klang haben. Hat jemand anderes dieses Problem gehabt?
73
Paul M7PBN


Mike Stone
 

I too had a problem on one of the Morserinos I assembled.  It was a poorly soldered pin on the multi-pin display unit, clearly visible under a magnifying lens.
Mike, N1VE

On Sep 16, 2020, at 2:43 PM, George Anderson <george.gm0syu@...> wrote:

Hi there Paul..
I had same issues .. no sound and issue with paddles

My main issue was my soldering wasn't great and there were a couple of bridges.
After a,little reheating joints all was fine 

I also had a repeating DAH when trying to use cw generator .

Try reheating all the solder joins you made while checking cw encoder 
I think we had same issues 

The m32 is awesome 

George gm0syu 

On Wed, 16 Sep 2020, 18:14 , <paulneedhamishere@...> wrote:
Hi Morserino-ers,
Just built my M-32 and all seemed to go well but I'm not getting sound. I am a relative novice in the soldering department so it could be a bad connection somewhere. I may send out a call to my local ham group to ask for help.

Mein Rig arbeitet nicht. Ich habe kein Klang haben. Hat jemand anderes dieses Problem gehabt?
73
Paul M7PBN